Description

Triaxial Cell Apparatus conforms to the requirements of IS:2720 (Part 11) & (Part 12) and is made from a corrosion-resistant material. Particular attention is paid to the quality of the finish between the stainless-steel plunger and the bushing.

The machine is used for determination of the shear strength parameters of a specimen tested in unconsolidated undrained triaxial compression without the measurement of pore pressure. The Triaxial Test System provides triaxial compression tests on cylindrical undisturbed and remolded soil samples. Supplied complete with Triaxial cell for 38mm dia specimen, Loading Frame 50 KN with 6 different speeds, Proving ring 2 KN with Calibration report, Dial Gauge 0.01 X 25mm travel and Lateral Pressure assembly. To work on 220/230 Volts, single phase, AC power supply.

Testing of Soil in Triaxial Cell :- Click here to see full Procedure

Technical Specification

• TRIAXIAL CELL 38MM, 50MM, 75MM, 100MM, 150MM & 200MM.

• Testing specimens of size 38mm dia x 76mm long.

The following accessories comes with TRIAXIAL CELL.

• Top loading pad, Perspex, 38mm, 50mm, 75mm, 100mm, 150mm & 200mm
• Plain Perspex disc 38mm dia x 6mm thick,38mm, 50mm, 75mm, 100mm, 150mm & 200mm
• Porous Stone 38mm dia x 6mm thick,38mm, 50mm, 75mm, 100mm, 150mm & 200mm
• Sheath Stretcher for DIA 38mm, 50mm, 75mm, 100mm, 150mm & 200mm specimen
• Stand former for 38mm, 50mm, 75mm, 100mm, 150mm & 200mm dia
• Rubber Sheath for 38mm, 50mm, 75mm, 100mm, 150mm & 200mm dia specimen
• Drainage tube for 38mm, 50mm, 75mm, 100mm, 150mm & 200mm
• ‘O’ rings for 38mm, 50mm, 75mm, 100mm, 150mm & 200mm specimen
• Brass pedestal 38mm, 50mm, 75mm, 100mm, 150mm & 200mm dia
• Split Mould, 38mm dia x 76mm long

TRIAXIAL LOADFRAME SINGLE SPEED & 30SPEED FOR 38MM, 50MM, 75MM, 100MM, 150MM & 200MM.

The Load Frame consists of a cabinet that houses the gear system and motor with a sturdy angle iron frame. the loading is done through the bottom loading platen, which is carried on a lead screw, which advances upwards. the top load bracket, which slides over two upright pillars, can be positioned at any desired height and locked. It carries a screw adapter for standard Proving rings and Load Cells.

The loading part of the unit is detachable from the main unit for ease of transport and to avoid damage to the tension rods.

• 30 fixed speeds between 0.00048 mm/min and 6.00 mm/min.
• Suitable for operation on 220 V, 50 Hz, single-phase, AC supply.

• Top loading pad 38mm, 50mm, 75mm, 100mm, 150mm & 200mm(plain)

Note :- Triaxial Cell Apparatus comes with one year warranty

Standard   : IS:2720 (Part 11) & (Part 12)