Shrinkage Bar Mould-Two Gang
This Shrinkage Bar Mould-Two Gang is used for the determination of soundness. The change in length of the specimen is determined by the
Cylindrical Mould
The Cylindrical Mould is used for testing concrete cylinders for compressive strength tests. The mould is split vertically into two
Cube Mould
The cube mould is normally made in two halves to facilitate the removal of the concrete cube without damage.
Beam Mould
Beam Moulds are made of Cast Iron / Mild Steel. Beam moulds are made of 4 plates assembled together.
Proctor Mould with Rammer
Proctor Mould with Rammer is a fundamental requirement for the construction of earth fill for dams, reservoirs, canal embankments
Le Chatelier Mould
Le Chatelier Mould is consists of a small split cylinder forming a mould, On either side of the split cylinder, two parallel indicating
California Bearing Ratio manual
California Bearing Ratio manual Description Standard : Model No. : PIT- Comprises a screw operated load frame, cap.2500kg with a gear box and motor drive giving 1.25, 1.5, 2.5mm/min. Rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket. Supplied with one pair of male/female coning tools for…
Servo Smart California Bearing Ratio
Servo Smart California Bearing Ratio Description Standard : Model No. : PIT- The California Bearing Ratio is used to determine the strength of subgrade soil and highway sub bases by using penetration testing method. It is designed to test the cohesive property of the materials having particle size less than 19mm or as specified in…
Digital Marshall Stability Apparatus
Digital Marshall Stability apparatus specifically designed to measure the resistance of the plastic flow of the cylindrical specimen for the bituminous paving of the loaded mixture on a flat surface
Your Guide To Compression Testing Machines
Compression Testing Machines